HIKVISION DS-8100HFI-ST Series Page 93 User Manual Download

Page: 93 / 199

User Manual of DS-8100HFI-ST Series DVR

Enter Log Search interface.

Menu>Maintenance>Log Search

Set search time and type and press Search button.

Figure 6.29 System Log Search Interface

Choose a log with record file and press

button to enter Playback interface.

Note:

If there is no record file at the time point of the log, the message box “no related record file” will

pop up.

Figure 6.29 Result of System Log Search

Playback interface.

The toolbar in the bottom part of Playback interface can be used to control playing process.

Summary of Contents for DS-8100HFI-ST Series








































































































































































































Search results

Summary of Contents for DS-8100HFI-ST Series

Reviews:

Related manuals for DS-8100HFI-ST Series

Brands by name

Popular brands

HIKVISION DS-8100HFI-ST Series, User Manual

Search results

Summary of Contents for DS-8100HFI-ST Series

Reviews:

Related manuals for DS-8100HFI-ST Series

Brands by name

Popular brands