manualshive.com logo in svg

HIKVISION DS-8100HFI-ST Series, User Manual, Page: 102 / 199

Share
Download
HIKVISION DS-8100HFI-ST Series User Manual Download Page 102

User Manual of DS-8100HFI-ST Series DVR 

 

101 

7.1 Backing up Record Files 

7.1.1 Quick Export 

Purpose: 

Export record files to backup device(s) quickly. 

Steps: 

1.

 

Enter Video Export interface. 

Choose the channel(s) you want to back up and press

 Quick Export

 button. 

Note:

   

1.

 

The time duration of record files on a specified channel cannot exceed one day. Otherwise, the 

message box “Max. 24 hours are allowed for quick export.” will pop up. 

2.

 

The number of channels for synchronous export cannot exceed 4. Otherwise, the message box “Max. 4 

channels are allowed for synchronous quick export.” will pop up.     

 

Figure 7.1 Quick Export Interface

 

2.

 

Export. 

Go to Export interface, choose backup device and press 

Export

 button to start exporting. 

Note:

 

Here we use USB Flash Drive and please refer to the next section Normal Backup for more 

backup devices supported by the device.

 

Summary of Contents for DS-8100HFI-ST Series








































































































































































































Reviews:

No comments