HIKVISION DS-8100HFI-ST Series User Manual Download Page 20

Page: 20 / 199

User Manual of DS-8100HFI-ST Series DVR

1.3 USB Mouse Operation

A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this DVR. To use a USB mouse:

Plug USB mouse into one of the USB interfaces on the front panel of the DVR.

The mouse should automatically be detected. If in a rare case that the mouse is not detected, the

possible reason may be that the two devices are not compatible, please refer to the recommended the

device list from your provider.

The operation of the mouse:

Table 1.3 Description of the Mouse Control

Name

Action

Description

Left-Click

Single-Click

Live view: Select channel and show the quick set menu.

Menu: Select and enter.

Double-Click

Live view: Switch between single-screen and multi-screen.

Click and Drag

PTZ control: Wheeling.

Tamper-proof, privacy mask and motion detection: Select target area.

Digital zoom-in: Drag and select target area.

Live view: Drag channel/time bar.

Right-Click

Single-Click

Live view: Show menu.

Menu: Exit current menu to upper level menu.

Scroll-Wheel

Scrolling up

Live view: Previous screen.

Menu: Previous item.

Scrolling down

Live view: Next screen.

Menu: Next item.

1.4 Input Method Description

Figure 1.3 Soft Keyboard

Description of the buttons on the soft keyboard:

Table 1.4 Description of the Soft Keyboard Icons

Icons

Description

Icons

Description

English

Capital English

Numbers

Symbols

Lowercase/Uppercase

Backspace

Space

Enter

Exit

Summary of Contents for DS-8100HFI-ST Series








































































































































































































Search results

Summary of Contents for DS-8100HFI-ST Series

Reviews:

HIKVISION DS-8100HFI-ST Series, User Manual, Page: 20 / 199

Search results

Summary of Contents for DS-8100HFI-ST Series

Reviews: