HIKVISION DS-8100HFI-ST Series Page 111 User Manual Download

Page: 111 / 199

User Manual of DS-8100HFI-ST Series DVR

110

7.1.3 Backing up by Event Search

Purpose:

Back up event-related record files using USB devices (USB flash drives, USB HDDs, USB writer), SATA

writer or e-SATA HDD. Quick Backup and Normal Backup are supported.

Steps:

Enter Export interface.

Menu>Export>Event

Select “Alarm Input” from the dropdown list of Event Type.

Select the alarm input No. and time.

Press

Search

button to enter the Search Result interface.

Figure 7.20 Event Search for Backup

Select record files to export.

Select an alarm input in the list and press

Quick Export

button to enter Export interface.

Pressing

Details

button will take you to the interface with detailed information of all channels

triggered by the selected alarm input.

Note:

Event types contain Alarm Input and Motion.

Pressing

Quick Export

button will export record files of all channels triggered by the selected

alarm input.

Summary of Contents for DS-8100HFI-ST Series








































































































































































































Search results

Summary of Contents for DS-8100HFI-ST Series

Reviews:

Related manuals for DS-8100HFI-ST Series

Brands by name

Popular brands

HIKVISION DS-8100HFI-ST Series, User Manual

Search results

Summary of Contents for DS-8100HFI-ST Series

Reviews:

Related manuals for DS-8100HFI-ST Series

Brands by name

Popular brands