manualshive.com logo in svg

HIKVISION DS-8100HFI-ST Series, User Manual, Page: 69 / 199

Share
Download
HIKVISION DS-8100HFI-ST Series User Manual Download Page 69

User Manual of DS-8100HFI-ST Series DVR 

 

68 

 

Figure 5.30 Edit Schedule- Motion| Alarm

 

 

5)

 

To schedule an all-day recording, select the checkbox after the 

All Day

 item

. 

6)

 

To arrange other schedule, leave the 

All Day 

checkbox blank 

  and set the Start/End time.   

Note:

 Up to 8 periods can be configured for each day. And the time periods can’t be overlapped each other. 

Repeat the above steps to schedule for all the week. If the schedule can also be applied  to other days, click

 

Copy

.

 

7)

 

Click

 Apply

 to save settings.

 

8)

 

Click

 OK 

to back to the upper level menu.

 

Repeat the above steps to schedule  Motion | Alarm or Motion & Alarm triggered recording/capture  to other 

channels. If the setting can also be applied to other channels, click 

Copy

 and then choose the channel number. 

 

 

 

 

 

Summary of Contents for DS-8100HFI-ST Series








































































































































































































Reviews:

No comments