HIKVISION DS-8100HFI-ST Series Page 112 User Manual Download

Page: 112 / 199

User Manual of DS-8100HFI-ST Series DVR

111

Figure 7.21 Result of Event Search

Click Details button to view detailed information of the record file, e.g. start time, end time,

file size, etc.

Note:

The size of the currently selected files is displayed in the lower-left corner of the

window.

Figure 7.22 Event Details Interface

Export.

Click the

Export

button and start backup.

Note:

If the inserted USB device is not recognized:

•

Click the Refresh button.

•

Reconnect device.

•

Check for compatibility from vendor.

You can also format USB flash drive or USB HDDs via the device.

Summary of Contents for DS-8100HFI-ST Series








































































































































































































Search results

Summary of Contents for DS-8100HFI-ST Series

Reviews:

Related manuals for DS-8100HFI-ST Series

Brands by name

Popular brands

HIKVISION DS-8100HFI-ST Series, User Manual

Search results

Summary of Contents for DS-8100HFI-ST Series

Reviews:

Related manuals for DS-8100HFI-ST Series

Brands by name

Popular brands