HIKVISION DS-8100HFI-ST Series Page 144 User Manual Download

Page: 144 / 199

User Manual of DS-8100HFI-ST Series DVR

143

Figure 9.11 Configure FTP Settings

Directory:

In the

Directory

field, you can select the Root Directory, Parent directory and secondary

directory. When the Parent Directory is selected, you have the option to use the Device Name,

Device No or Device IP for the name of the directory; and the when the Secondary Directory is

selected, you can use the Camera Name or Camera No. as the name of the directory.

Click the

Apply

button to save and exit the interface.

Note:

Please make sure the remote FTP server has been started up before setting the FTP parameters.

9.2.5 Configuring SNMP

Purpose:

You can use SNMP protocol to get device status and parameters related information.

Steps:

Enter the Network Settings interface.

Menu > Configuration > Network

Select the

SNMP

tab to enter the SNMP Settings interface, as shown in Figure 9.12.

Figure 9.12 SNMP Settings Interface

Summary of Contents for DS-8100HFI-ST Series








































































































































































































Search results

Summary of Contents for DS-8100HFI-ST Series

Reviews:

Related manuals for DS-8100HFI-ST Series

Brands by name

Popular brands

HIKVISION DS-8100HFI-ST Series, User Manual

Search results

Summary of Contents for DS-8100HFI-ST Series

Reviews:

Related manuals for DS-8100HFI-ST Series

Brands by name

Popular brands