HIKVISION DS-8100HFI-ST Series Page 129 User Manual Download

Page: 129 / 199

User Manual of DS-8100HFI-ST Series DVR

128

Note:

Time periods shall not be repeated or overlapped.

Figure 8.13 Set Arming Schedule of Video Loss

Select

Handling

tab to set up alarm response action of video loss (please refer to

Chapter 8.6

Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy

button to copy an arming schedule to other days.

Click the

button to complete the video loss settings of the channel.

If you want to set up video loss handling method for another channel, repeat the above steps or just copy

the above settings to it.

Figure 8.14 Copy Settings of Video Loss

8.4 Detecting Video Tampering

Purpose:

Trigger alarm when the lens is covered and take alarm response action(s).

Steps:

Enter Video Tampering interface of Camera Management and select a channel you want to detect video

Summary of Contents for DS-8100HFI-ST Series








































































































































































































Search results

Summary of Contents for DS-8100HFI-ST Series

Reviews:

Related manuals for DS-8100HFI-ST Series

Brands by name

Popular brands

HIKVISION DS-8100HFI-ST Series, User Manual

Search results

Summary of Contents for DS-8100HFI-ST Series

Reviews:

Related manuals for DS-8100HFI-ST Series

Brands by name

Popular brands