HIKVISION DS-6102 Series User Manual Download Page 44

Page: 44 / 107

User Manual of Portable Video Recorder

Alarm

Chapter 9

Acceleration Alarm

9.1

Acceleration Alarm function is not supported by DS-6102HLI-SE series PVR.

When the PVR drops down at a fast speed, it will generate acceleration alarm and then upload the acceleration alarm to the

platform. Meanwhile, the PVR will vibrate to send a notification, with the message “Acceleration alarm” displayed on the

interface.

Acceleration Alarm

Figure 9. 1

Manual Alarm

9.2

In emergency conditions, press the Alarm button on the side of PVR manually. Then, the manual alarm information will be

uploaded to the platform, and the PVR will vibrate to send a notification, with the message “Manual alarm” displayed on

the interface.

Summary of Contents for DS-6102 Series












































































































Search results

Summary of Contents for DS-6102 Series

Reviews:

Related manuals for DS-6102 Series

Brands by name

Popular brands

HIKVISION DS-6102 Series, User Manual

Search results

Summary of Contents for DS-6102 Series

Reviews:

Related manuals for DS-6102 Series

Brands by name

Popular brands