HIKVISION DS-6102 Series User Manual Download Page 61

Page: 61 / 107

User Manual of Portable Video Recorder

Platform

11.4

The PVR can be connected to iVMS-7200 series platform, providing functions including live view, two-way audio, alarm, etc.

Steps:

Tap

Settings

NET

Platform settings

to enter the Platform Settings interface.

Platform Settings

Figure 11. 23

Swipe the slider of Platform to the right side to enable the platform settings, and then input the required information.



Platform IP Address:

the IP address of the computer running the platform server.



Platform Port:

the network communication port of the platform. The default value is 7660.



Device ID:

the identification name of the device. The device ID should be registered on the platform first.

Platform Settings

Figure 11. 24

Summary of Contents for DS-6102 Series












































































































Search results

Summary of Contents for DS-6102 Series

Reviews:

Related manuals for DS-6102 Series

Brands by name

Popular brands

HIKVISION DS-6102 Series, User Manual

Search results

Summary of Contents for DS-6102 Series

Reviews:

Related manuals for DS-6102 Series

Brands by name

Popular brands