HIKVISION DS-6102 Series User Manual Download Page 75

Page: 75 / 107

User Manual of Portable Video Recorder

Audio & Video Storage

Figure 12. 16

12.7.2

Storage Space Management

You can view the status of the internal and external storage space and format the storage space if needed.

Steps:

Tap

Settings > DEV > Storage

You can view the storage status of the internal storage and external storage.



Total Space:

the total capacity of the internal or external storage.



Available:

the free space of the internal or external storage.



Internal Memory Formatting:

Format the internal storage, and then the video files, audio files and picture files

stored on the internal storage will be erased, except the operating system data.



Unmount SD Card:

Tap the

Unmount SD card

item before you remove the external SD card from the PVR.



Erase SD Card:

Format the external SD card and you will lose all the data stored on the SD card.

Storage Settings

Figure 12. 17

Summary of Contents for DS-6102 Series












































































































Search results

Summary of Contents for DS-6102 Series

Reviews:

Related manuals for DS-6102 Series

Brands by name

Popular brands

HIKVISION DS-6102 Series, User Manual

Search results

Summary of Contents for DS-6102 Series

Reviews:

Related manuals for DS-6102 Series

Brands by name

Popular brands