HIKVISION DS-6102 Series User Manual Download Page 19

Page: 19 / 107

User Manual of Portable Video Recorder

The larger the numeric is, the higher the priority is.

Startup and Shutdown

2.6

2.6.1

Startup

Insert the power adapter or install the battery into the device, and then long press the

POWER

button on the right-side to

start up the device. The Login interface will be displayed on the screen after the startup process is complete.

2.6.2

Shutdown

Do not uninstall the battery to shut down the device.

To shut down or reboot the device, long press the POWER button on the right-side of the PVR to enter the Shutdown

interface, shown as below:

Shutdown

Figure 2. 3

Tap

Power off

, and tap

to shut down the device.

Tap

Reboot

, and tap

to reboot the device.

Tap the icon

to enable the silent mode; Tap the icon

to enable the vibrate mode; Tap the icon

to enable the

ring mode.

Summary of Contents for DS-6102 Series












































































































Search results

Summary of Contents for DS-6102 Series

Reviews:

Related manuals for DS-6102 Series

Brands by name

Popular brands

HIKVISION DS-6102 Series, User Manual

Search results

Summary of Contents for DS-6102 Series

Reviews:

Related manuals for DS-6102 Series

Brands by name

Popular brands