HIKVISION DS-6102 Series User Manual Download Page 32

Page: 32 / 107

User Manual of Portable Video Recorder

Two-way Audio and Group Intercom

Chapter 6

Two-way Audio

6.1

Before you start:

Section 10.4 Platform

With the built-in speaker and pick-up, the PVR supports the two-way audio with the platform after the registration is

complete, in no need of other associated equipment (including headset and so on).

The two-way audio is initiated by the platform, and the PVR cannot send the two-way audio request.

Audio Settings

6.2

You can record the two-way audio (between device and platform) or voice talk (between members in the group) in the

audio recorder or video stream.

Steps:

Tap

Settings

MED

Additional Settings

Audio settings

to enter the Audio Settings interface.

Check the checkbox of

Intercom Mix

Audio Settings

Figure 6. 1

Summary of Contents for DS-6102 Series












































































































Search results

Summary of Contents for DS-6102 Series

Reviews:

Related manuals for DS-6102 Series

Brands by name

Popular brands

HIKVISION DS-6102 Series, User Manual

Search results

Summary of Contents for DS-6102 Series

Reviews:

Related manuals for DS-6102 Series

Brands by name

Popular brands