HIKVISION DS-6102 Series User Manual Download Page 77

Page: 77 / 107

User Manual of Portable Video Recorder

Home Page

Figure 12. 19

12.8.2

View Installed Applications

Purpose:

You can view the downloaded, running, and all applications.

Tap

Settings > DEV > Applications

Swipe left or right, and you can view the detailed information of the applications.



DOWNLOADED:

The downloaded applications will be displayed. You can also view the used space and free space

of internal storage at the bottom of the interface.



RUNNING:

The current running applications will be displayed. You can also view the used space of RAM and free

space of RAM at the bottom of the interface.



ALL:

All the applications on the device will be displayed. You can also view the used space and free space of

internal storage at the bottom of the interface.

Do not delete or uninstall the default programs at will, for it may cause damage to the system.

Summary of Contents for DS-6102 Series












































































































Search results

Summary of Contents for DS-6102 Series

Reviews:

Related manuals for DS-6102 Series

Brands by name

Popular brands

HIKVISION DS-6102 Series, User Manual

Search results

Summary of Contents for DS-6102 Series

Reviews:

Related manuals for DS-6102 Series

Brands by name

Popular brands