HIKVISION DS-6102 Series User Manual Download Page 26

Page: 26 / 107

User Manual of Portable Video Recorder

Connecting PVR to Computer

3.7

Purpose:

Connect PVR to a computer using the USB cable, and then you can copy files from PVR to the computer or copy files from

the computer to PVR.

Steps:

Start the PVR, and then connect it to the computer using a USB cable.

Enter the Notification Center, and the message “USB connected” will be displayed on the list.

Notification Center

Figure 3. 9

Tap the item to enter the USB Mass Storage Settings interface.

USB Mass Storage Settings

Figure 3. 10

Tap

Turn on USB storage

on the screen. Then the color of android turns from green to yellow, and the message “USB

storage in use” appears, indicating that the PVR is successfully connected to the computer via USB interface.

Summary of Contents for DS-6102 Series












































































































Search results

Summary of Contents for DS-6102 Series

Reviews:

Related manuals for DS-6102 Series

Brands by name

Popular brands

HIKVISION DS-6102 Series, User Manual

Search results

Summary of Contents for DS-6102 Series

Reviews:

Related manuals for DS-6102 Series

Brands by name

Popular brands