HIKVISION DS-6102 Series User Manual Download Page 36

Page: 36 / 107

User Manual of Portable Video Recorder

Video

Figure 8. 2

8.1.1

Viewing the Video File

Steps:

In Video File Management interface, tap the date folder you want to view. The videos are sorted by date. Videos

recorded in the same date belong to the same folder.

Tap a video file to start playing it.

Video File

Figure 8. 3

Table 8. 1

Icon Description

Icon

Name

Description

Pause/Play

Pause/Play the video.

Speed up/down

Increase/Decrease the play speed of video. 1x, 2x and 3x are supported.

Details

View the details of the video, including file name, time, size, etc.

Delete

Delete the video file.

Return

Go back to the video file list interface.

Record

Go to the record interface of camera.

Summary of Contents for DS-6102 Series












































































































Search results

Summary of Contents for DS-6102 Series

Reviews:

Related manuals for DS-6102 Series

Brands by name

Popular brands

HIKVISION DS-6102 Series, User Manual

Search results

Summary of Contents for DS-6102 Series

Reviews:

Related manuals for DS-6102 Series

Brands by name

Popular brands