HIKVISION DS-6102 Series User Manual Download Page 60

Page: 60 / 107

User Manual of Portable Video Recorder

Positioning

Figure 11. 21

Swipe the slider of position switch to the right side to enable the positioning settings.

The longitude, latitude, time, positioning accuracy and speed of the device will be displayed automatically when the

positioning signal is available.

Turn on Positioning

Figure 11. 22



To realize the BDS function, plug the additional BDS module into the device, select BDS as the positioning working

mode, and then reboot the device to activate the new settings.



Locate the device in open space to receive the positioning signal if no data is displayed.



Once positioning succeeded, system time will be synchronized with the time gotten from GPS/BDS satellite. And the

priority of positioning time synchronization is higher than time set manually or automatically.

Summary of Contents for DS-6102 Series












































































































Search results

Summary of Contents for DS-6102 Series

Reviews:

Related manuals for DS-6102 Series

Brands by name

Popular brands

HIKVISION DS-6102 Series, User Manual

Search results

Summary of Contents for DS-6102 Series

Reviews:

Related manuals for DS-6102 Series

Brands by name

Popular brands