HIKVISION DS-6102 Series User Manual Download Page 93

Page: 93 / 107

User Manual of Portable Video Recorder

13.3.5

Video Platform Manager

Steps:

Tap the

Video platform manager

item.

Select the proper video platform from the list.

Reboot the device to activate the new settings.

Go to Settings > NET > Platform settings, and configure the platform parameters. For details, see

Section 11.4 Platform.

Platform Settings

Figure 13. 21

13.3.6

Boot Animation and Logo

Steps:

Tap the

Boot animation or logo

item.

Select the boot animation or boot logo for set.

Select the package file or picture file from the SD card, and you can set the boot animation and logo for the device as

desired.

The boot animation should be in the *.zip format; the boot logo (480*800) should be in the *.jpeg format.

Summary of Contents for DS-6102 Series












































































































Search results

Summary of Contents for DS-6102 Series

Reviews:

Related manuals for DS-6102 Series

Brands by name

Popular brands

HIKVISION DS-6102 Series, User Manual

Search results

Summary of Contents for DS-6102 Series

Reviews:

Related manuals for DS-6102 Series

Brands by name

Popular brands