COMPUSHIFT II Manual – COMPUSHIFT II Manual
Driving & Shifting
–
73
•
•
•
•
•
5.3 Using the A/B Mode Switch (Optional)
To change between modes, press and hold the button for 2 seconds. It will be illuminated when you are in Mode B.
When you start the vehicle, the system will always start in Mode A.
5.3.1 DASHBOARD Screens
A-B Mode is available for two of the DASHBOARD screens:
You will only be able to see and adjust the setting for your current mode.
You can adjust these on the fly by pressing the up or down key.
5.3.2 SETUP Screens
, many settings offer an Mode A/B feature.
The settings that are intrinsic to your vehicle (such as vehicle weight and final drive ratio) do not offer Mode
settings; they are constant for both modes.
You should only enter SETUP mode when it is safe to do so.
Do not attempt to adjust these settings while driving.
5.4 Using the Overdrive Cancel Switch (Optional)
The pushbutton is a momentary type. Press it once and it will cancel the overdrive function. Touch it again and it
will restore overdrive.
The light on the switch will be on when overdrive is off.
