Chapter 4 Web User Interface
The IP, Subnet Mask and Gateway parameters are editable only when DHCP is set to OFF.
1. In the
IP
box, enter the IP address for the MarinePak7.
2. In the
Subnet Mask
box, enter the subnet for the MarinePak7.
3. In the
Gateway
box, enter the IP address for the Gateway used by the MarinePak7.
4. Click the
DHCP
drop menu and select the DHCP mode used by the MarinePak7.
Select
ON
to enable DHCP and use dynamic IP addresses.
Select
Off
to disable DHCP and use static IP addresses.
5. Click the
Save changes
button.
4.4.12 NTRIP Tile
The NTRIP tile displays the active NTRIP configuration.
MarinePak7 User Manual 2
75
