Chapter 3 Configure the MarinePak7 Using the LCD UI
3.13.1 System Configuration
From the System Status screen, press the
Enter
button to access the System configuration screen.
Use the
Up
and
Down
buttons to navigate between the configuration options. Move to the parameter that
is to be configured and press the
Enter
button to enable EDIT MODE<>. Use the arrow buttons to change
the configuration. Press the
Enter
button to save the configuration.
WiFi
1. Press the
Left
or
Right
button to highlight the WiFi option.
2. Press the
Enter
button to access the On and Off option.
3. Press the
Left
or
Right
button to make a selection.
On
Enables WiFi.
Off
Disables WiFi.
4. Press the
Enter
button to confirm the selection.
ANT1
1. Press the
Left
or
Right
button to highlight the ANT1 option.
2. Press the
Enter
button to access the On and Off option.
3. Press the
Left
or
Right
button to make a selection.
On
Enables antenna power to the GNSS1 port. This port connects to the primary GNSS \
MSK beacon antenna.
Off
Disables power to the GNSS1 port.
4. Press the
Enter
button to confirm the selection.
ANT2
1. Press the
Left
or
Right
button to highlight the ANT2 option.
2. Press the
Enter
button to access the On and Off option.
MarinePak7 User Manual 2
57
