Chapter 3 Configure the MarinePak7 Using the LCD UI
To access the Serial Status screen from the Home screen, press the
Right
button until the Serial Status
screen displays.
For MarinePak7 models without the UHF module, the GSM Status screen follows the MSK
Status screen.
The following parameters are available for each serial port.
Serial Line
Standard
Displays the COM port line standard (RS232/RS422).
Baud Rate
Displays the COM port baud rate.
Serial
Protocol
Settings
Displays the COM port communication settings (data bits, parity, stop bits).
Receive or
Transmit
Protocol
Displays the receive or transmit interface mode. The interface mode determines the type of
messages the serial port accepts or transmits. See
MarinePak7 User Manual 2
47
