Chapter 3 Configure the MarinePak7 Using the LCD UI
The UHF Status and UHF Configuration screens are not visible when the MarinePak7 is in Base
Station mode. You must change the MarinePak7 mode to
Rover
on the System Configuration
screen (see
on page 57) to access UHF screens.
To enable the UHF module, the correction source (
Correction Src
) must be set to
UHF
on the
Position Configuration screen (see
This screen display the status of the UHF radio module.
To access the UHF Status screen from the Home screen, press the
Right
button until the UHF Status
screen displays.
Status Indicator
Displays GREEN when the UHF module is locked onto a UHF channel.
Signal Power
Displays the UHF reception signal power.
Mode
Displays the mode to which the UHF radio is set: RX (Receive).
Compatibility
Displays the current UHF radio compatibility mode.
Frequency
Displays the radio frequency of the selected UHF channel.
3.8.1 UHF Configuration
From the UHF Status screen, press the
Enter
button to access the UHF configuration screen.
MarinePak7 User Manual 2
43
