Hexagon NovAtel MarinePak7, User Manual

Page: 45 / 121

Chapter 3 Configure the MarinePak7 Using the LCD UI
Compatibility
Mode
Protocol Modulation
Link Rate (bps),
Channel Spacing (kHz)
FEC
11 PacCrest GMSK 9600,25.0 OFF
12 PacCrest 4FSK 19200,25.0 ON
13 PacCrest 4FSK 19200,25.0 OFF
14 PacCrest FST 4FSK 19200,25.0 ON
15 PacCrest FST 4FSK 19200,25.0 OFF
16 Trimtalk GMSK 9600,25.0
17 Trimtalk GMSK 16000,12.5
18 Satel 3AS 4FSK 19200,25.0 ON
19 Satel 3AS 4FSK 19200,25.0 OFF
Frequency
Use the Left and Right buttons to set the radio frequency of the selected UHF channel (410.000 MHz to
475.000 MHz).
After the configuration options have been set, press the Enter button to accept the changes and save the
settings to the receiver.
Press the Back button to return to the UHF Status screen or press the Home button to return to the
Position Status screen.
3.9 GSM Status
The GSM Status screen is not visible when the MarinePak7 is in Base Station mode. You must
change the MarinePak7 mode to Rover on the
System Configuration screen (see System
Configuration on page 57) to access GSM Status screen.
To enable the GSM module, the correction source ( Correction Src ) must be set to GSM on the
Position Configuration screen (see Position Configuration on page 30).
This screen displays the status of the GSM cellular modem.
MarinePak7 User Manual 2 45