Chapter 3 Configure the MarinePak7 Using the LCD UI
3.11 Net Port Status
The Net Port Status screen displays the status of the network port (ICOM port) the receiver uses to
communicate through the Ethernet connection.
To access the Network Status screen from the Home screen, press the
Right
button until the Net Port
Status screen displays.
For MarinePak7 models without the UHF module, the GSM Status screen follows the MSK
Status screen.
The following parameters are available for each ICOM port.
Protocol
The protocol used by the ICOM port.
Port Number
The network port number.
Rx or Tx
Protocol
Displays the receive or transmit protocol. The protocol determines the type of messages
the ICOM port accepts or transmits.
3.11.1 Net Port Configuration
From the Net Port Status screen, press the
Enter
button to access the Net Port configuration screen.
MarinePak7 User Manual 2
51
