Hewlett Packard Enterprise ProLiant m510 Page 62 User Manual Download

Page: 62 / 125

Adding the Embedded UEFI Shell to the UEFI Boot Order
list

Prerequisite

Boot Mode

is set to

UEFI Mode

Procedure

From the

System Utilities

screen, select

System Configuration

BIOS/Platform Configuration

(RBSU)

Embedded UEFI Shell

Add Embedded UEFI Shell to Boot Order

Select a setting.

•

Enabled

—Adds the embedded UEFI Shell to the boot order list on the next reboot.

•

Disabled

—The embedded UEFI Shell is not added to the boot order list.

Save your setting.

UEFI Shell Script Auto-Start

Use this option to enable or disable automatic execution of the Embedded UEFI Shell startup script
during Shell startup.

• You can use the startup script to create a RAM disk, download files from the network, collect data,

upload results back to network, and then boot to the OS without rebooting the system.

• You can store the script file on local media, or access it from a network location.

• Name the script file

startup.nsh

and place it on local media or a network location accessible to the

server.

• When auto-start is enabled, and the

Shell Auto-Start Script Location

option is set to

Auto

, the Shell

looks for the script file in any of the FAT16 or FAT32 file systems available.

• It is recommended that you have only one

startup.nsh

file on one file system.

Enabling or disabling automatic execution of the
Embedded UEFI Shell startup script

Use the

UEFI Shell Script Auto-Start

option to enable or disable automatic execution of the Embedded

UEFI Shell startup script during Shell startup.

• You can use the startup script to create a RAM disk, download files from the network, collect data,

upload results back to network, and then boot to the OS without rebooting the system.

• You can store the script file on local media, or access it from a network location.

• Name the script file

startup.nsh

and place it on local media or a network location accessible to the

server.

• When auto-start is enabled, and the

Shell Auto-Start Script Location

option is set to

Auto

, the Shell

looks for the script file in a network location first, followed by any locally attached FAT16, or FAT32-
formatted media.

• It is recommended that you have only one

startup.nsh

file on one file system.

Configuring the Embedded UEFI Shell

Summary of Contents for ProLiant m510






























































































































Search results

Summary of Contents for ProLiant m510

Reviews:

Related manuals for ProLiant m510

Brands by name

Popular brands

Hewlett Packard Enterprise ProLiant m510, User Manual

Search results

Summary of Contents for ProLiant m510

Reviews:

Related manuals for ProLiant m510

Brands by name

Popular brands