Enabling or disabling PCI Bus padding
Procedure
1.
From the
System Utilities
screen, select
System Configuration
>
BIOS/Platform Configuration
(RBSU)
>
Advanced Options
>
Advanced System ROM Options
>
PCI Bus Padding Options
and
press
Enter
.
2.
Select a setting and press
Enter
.
a. Enabled
b. Disabled
3.
Press
F10
.
Consistent Device Naming
Use this option to set the level of Consistent Device Naming. On supported operating systems, device
naming controls how NIC ports are named based on their locations in the system.
NOTE:
Existing NIC connections retain their names until reinstalled under the OS environment.
Enabling or disabling Consistent Device Naming
On supported operating systems, use the
Consistent Device Naming
option to control how NIC ports
are named based on their locations in the system.
NOTE:
Existing NIC connections retain their names until reinstalled under the OS environment.
Procedure
1.
From the
System Utilities
screen, select
System Configuration
>
BIOS/Platform Configuration
(RBSU)
>
Advanced Options
>
Consistent Device Naming
.
2.
Select a setting.
•
CDN Support for LOMs and Slots
—Names all NIC ports on the system.
•
CDN Support for LOMs Only
—Names Embedded NICs and FlexibleLOMs, but no other NIC
ports.
•
Disabled
—Disables consistent device naming.
3.
Save your setting.
Serial Number
Use this option to re-enter the server serial number after replacing the system board. Consult a qualified
IT service specialist for assistance in modifying this value.
Configuring advanced platform configuration options
105
