•
DHCP Routes
—Specifies whether iLO uses the DHCP server-supplied static routes.
•
Route 1
,
Route 2
, and
Route 3
—If
DHCP Routes
is disabled, specifies the iLO static route
destination, mask, and gateway addresses.
•
DNS from DHCP
—Specifies whether iLO uses the DHCP server-supplied DNS server list.
•
DNS Server 1
,
DNS Server 2
,
DNS Server 3
—If
DNS from DHCP
is disabled, specifies the primary,
secondary, and tertiary DNS servers.
•
WINS from DHCP
—Specifies whether iLO uses the DHCP server-supplied WINS server list.
•
Register with WINS Server
—Specifies whether iLO registers its name with a WINS server.
•
WINS Server #1
and
WINS Server #2
—If
WINS from DHCP
is disabled, specifies the primary and
secondary WINS servers.
•
Domain Name
—The iLO domain name. If DHCP is not used, specifies a domain name.
Configuring Advanced Network Options
Procedure
1.
From the
System Utilities
screen, select
System Configuration
>
iLO 5 Configuration Utility
>
Advanced Network Options
.
2.
Select any of the
, and then select a setting or enter a value for that
option.
3.
Save your settings.
User Management
•
•
Add User
Use this option to add new local iLO user accounts, with the following privileges and information.
iLO 5 user privileges
•
Administer User Accounts
—Enables a user to add, edit, and delete local iLO user accounts. A user
with this privilege can change privileges for all users.
If you do not have this privilege, you can view your own settings and change your own password.
•
Remote Console Access
—Enables a user to remotely access the host system Remote Console,
including video, keyboard, and mouse control.
•
Virtual Power and Reset
—Enables a user to power-cycle or reset the host system.
These activities interrupt the system availability. A user with this privilege can diagnose the system by
using the
Generate NMI to System
button.
•
Virtual Media
—Enables a user to use the Virtual Media feature on the host system.
•
Configure Settings
—Enables a user to configure most iLO settings, including security settings, and
to remotely update the iLO firmware.
20
System Configuration
