Hettich 9 257 300, Operating And Assembly Instructions Manual

Page: 15 / 144

15
4. Description of the machine
4.3 Machine controls
The machine has several operating controls that are used for
controlling and monitoring.
Fig. 6: Controls and two hand switch
1 / 5 = Pushbutton for two hand switching
2
= Control ON
3 = Emergency stop button
4 = Control OFF
The assembly process is started by simultaneously pressing and
holding down pushbuttons "1" and "5".
1
2
4
3
5
4.3.1 Main switch and set up switch
The power circuit breaker with main switch function is located on
the switch cabinet.
Fig. 7: Main switch and set up switch on switch cabinet
Main switch
• 0/OFF setting = machine switched off
• I/ON setting = machine switched on
Set up switch (key)
• 0/OFF setting= set up mode switched off
• I/ON setting= set up mode switched on
Warning
Risk of injury in set up mode!
After pressing the set up switch, the servo width
adjustment facility can be moved in jog mode
without two hand operation. This increases the
risk of injury.
Only authorised and instructed persons are
permitted to operate the set up switch.
en