Hettich 9 257 300, Operating And Assembly Instructions Manual

Page: 19 / 144

19
5. Software
Clear malfunction button
Function Control colours Explanation
Pressing the Clear mal-
function button clears
the previously rectified
fault.
There is no mal-
function
There is a mal-
function – remedy
cause and then
clear malfunction
Manual steps (man. steps) button
Function Control colours Explanation
Pressing the man. steps
button
activates or deactiva-
tes the "manual steps"
mode
No enable for
activating mode
Mode:
Manual steps not
activated
Mode:
Manual steps have
been activated on
another Mobile
Panel
(flashing alter-
nately)
Mode:
Manual steps
activated
(2) Energy status
The colour coded energy status display bar is shown in each
screen. The energy status is derived from set up switch and guard
door (open, closed) constellations which are described in Section
3.2 Energy status. The following machine states can be displayed
in the energy status bar:
Energy
status
Colour coding Explanation
Energy
OFF
Cylinders are
not
being supplied
with compressed
air. Axes are
not
subject to
torque.
Air ON
(flashing alternately)
Cylinders being
supplied with
compressed air.
Axes are
not
subject to torque
Energy
ON
Cylinders being
supplied with
compressed air.
Axes are subject
to torque.
(3) Operating mode / status
This display bar shows the machine's operating modes, modes and
status in the "Main menu" user interfaces. These are described
below. The coloured background appears in all screens, apart from
the malfunctions screen. This provides the capability of inferring
the machine's current operating status at station screen level.
Operating mode
/ mode / status Colour coding
Explanation
Manual steps
Mode:
Manual steps
activated
Malfunction
active
Status:
Malfunction
active
Message active
Status:
Message active
en