Hettich 9 257 300, Operating And Assembly Instructions Manual

Page: 31 / 144

31
8.4 Sequence of movements
Setting drawer width (standard and custom widths)
• Enter and confirm the width dimension (275 mm min. / 1200
mm max.) on the control panel
Setting drawer depth
• Pull latch bolt, move to required dimension and let it snap
into place.
Repeat process on opposite side.
Note
Make sure that the same setting is selected on
both sides (left and right) for drawer depth.
i
8. Operation
en
Setting the drawer side profile receiver
Drawer side profile receiver closed - left-hand side
Receiver element in the BOTTOM position for standard drawer
side profile with 16 mm base thickness
Receiver element in the CENTRE position for low drawer side
profile with 8 mm base thickness