Herutu SD-4 Operation Manual Download Page 7

Page: 7 / 48



For handling the power supply:

Always observe the following precautions to prevent the power cord from being heated,

damaged, or ignited.



Do not bring the power cord close to fire nor put it into fire. The power cord
may be broken or ignited, resulting in an accident.



Use the AC adapter and the main body only with the specified power voltage to

protect them against damage or fire accidents.



Do not use the main body in a wettable atmosphere. It may cause accidents or

troubles such as heating, igniting, and electrical shock.



Do not touch the main body, the power cord, or the plug outlet with wet hands.

It may lead to accidents such as electrical shock.



Do not damage the power cord. A short circuit or heating may result, causing

fire or electrical shock.



Do not use the power plug with dust adhered on it. A short circuit or heating

may result, causing fire or electrical shock.



Do not give a strong impact onto the power cord.

It may cause an accident or a machine trouble.



Do not use the power cord if you find out deformation etc. in it.

It may cause an accident or a machine trouble.



Do not charge the main body in locations where flammable gas could be

generated.
It may result in igniting or a fire accident.



Never overhaul the main body.

It may cause an accident or a machine trouble.



When something erroneous has occurred during use:

Since it may cause fire, electrical shock, or the like, remove the power plug from the plug

outlet and ask the outlet store or us for repair.



When smoke or abnormal odors come out, immediately remove the power plug
from the plug outlet and ask the outlet store or us for repair.



Do not use the power cord if it is damaged.

U s i n g the damaged power cord may result in fire or electric shock.

Prohibited

Attention

Prohibited

Summary of Contents for SD-4

















































Search results

Summary of Contents for SD-4

Reviews:

Related manuals for SD-4

Brands by name

Popular brands

Herutu SD-4, Operation Manual

Search results

Summary of Contents for SD-4

Reviews:

Related manuals for SD-4

Brands by name

Popular brands