12
(2) Input the operation type of your choice with a 3-digit number. For example, to set the
type 523, input [5][2][3]. The resulting display is as follows:
(3) Press the [ENT] key to set the operation type you input. If you have inadvertently press
a wrong type No., press the [CLR] key and re-input the correct data.
* * * Error * * *
If you have input any number other than the type Nos. and pressed the [ENT] key, then an
error will result. In this case, the display blinks the following screen and automatically
returns to the re-input status without changing the preset type.
The operation type you set appears on the last three digits of the top line on the [Initial screen
2] (see page 17).
5
2
3
1
0
0
