29
2-2-8 Setting the Actual
Set the quantity of production actual, except there normally is no need to make this setting.
It is simply intended to preset the correct quantity of production actual in case there may
occur an error in the production actual for some reason or other.
For the types *2* and **2, press the [2] and [3] keys respectively to set the quantity of
production actual.
(1) Press the [2] key. The resulting display is as follows (for the type *2*):
(2) Input the quantity of production actual.
<e.g.> For 1253, input [1][2][5][3].
(3) If you press the [ENT] key after this, the value you input will be set as the quantity of
production actual. If you have inadvertently set a wrong data, press the [CLR] key and
re-input the correct data.
If the Actual is changed, the Advancement and Accomplishment rate will be automatically
changed based on the Plan.
Small changes to the Actual can also be made by using the [
]/[
] key.
2
The command No. is displayed for about
0.75 seconds.
↓
*
*
*
*
The currently set data
1
2
5
3
The value input
