30
2-2-9 Setting the Advancement
Set a degree of advancement, except there normally is no need to make this setting. It is
simply intended to preset a correct degree of advancement in case there may occur an error
in the advancement for some reason or other.
For the type **3, press the [3] key to set the advancement.
(1) Press the [3] key. The resulting display is as follows:
(2) For advancement, input a value with either a plus (+) or minus sign (-). First input either
the [+] key or the [-] key, and then input a value with the numeric keys.
<e.g.> For advancement of +13 (e.g.), input [+][1][3].
(3) If you press the [ENT] key after this, the value you input will be set as the advancement.
If you have inadvertently set a wrong data, press the [CLR] key and re-input the correct
data.
When choosing the operation type which includes target of display
「
Plan
」「
Advancement
」
「
Accomplishment rate
」
can’t be set any more. (The case of setting “1”)
3
The command No. is displayed for about
0.75 seconds.
↓
*
*
*
*
The currently set data
1
3
The value input (plus sign (+) is hidden)
