33
2-2-11 Setting the Clear time
Set the time to clear data. The Clear time function is a preset arrangement for executing
the clear operation ([CLR]) automatically when a preset time is reached. Up to three clear
times can be set.
(1) Press the [7] key. The resulting display is as follows:
(2) For clear time, input a value in the 24-hour format in the order of hours and minutes.
<e.g.> For 1:85 A.M., input [8][0][5].
(3) Press the [ENT] key to set the first clear time, and the display will return to the input
ready status for the second clear time.
If you have inadvertently set a wrong data, press the [CLR] key and re-input the correct
data.
By repeating the same procedure, you can set up to three clear times. If you press the
[ENT] key without inputting anything, then the command will end. You may use the [+]/[-]
key to move between the clear times you input.
7
The command No. is displayed for about
0.75 seconds.
↓
*
*.
*
*
The currently set data
0
1
The number of clear times
8
0
5
The value input
0
1
*
*.
*
*
The currently set data
0
2
The 2nd clear time
