13
2-1-2 Setting use or no use of the Working hour
This machine is so designed that use or no use of the Working hour can be set.
Note that the resulting operation differs depending on whether the Working hour is set to be
used or not used.
Setting
Set value
Description
Working
hour:
Not used
0
[5] (Register working hour) and [6] (Select working hour pattern)
are disabled.
The Plan calculation is carried out based on the status of external
input signals.
No recalculation function is available.
*Working
hour:
Used
1
[5] (Register working hour) and [6] (Select working hour pattern)
are enabled.
The Plan calculation is carried out based on the registered data of
working hours.
*Default values
<How to set>
(1) When on the function settings screen, press the [2] key on the keyboard.
The currently set value appears after
the sub command “C2” is displayed for 0.75
seconds.
(2) As the value you want to set, input either [0] (Not used) or [1] (Used).
<e.g.> To set the Working hour to be used, input [1]. The resulting display is as follows:
(3) Press the [ENT] key to set the change you input. If you have inadvertently input a
wrong data, press the [CLR] key and re-input the correct data.
F
1
[Function settings screen]
C
2
The sub command is
displayed.
*
The set value appears.
1
