Henny Penny LOV LVG-102, Technical Manual

Page: 52 / 98

Model LVG-102, 103, 104
7-13
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
Removal:
1. Remove the bottom, rear panel and the right side panel.
2. Using a 5/8” wrench, loosen the front, flexible line fitting,
on the pump.
3. Using a 1” wrench, loosen the rear pump fitting.
4. Locate the appropriate conduit on right side of the unti and
disconnect the conduit from the fryer.
5. Using a 1/2 in. wrench, remove 4 bolts securing motor to
motor bracket and pull pump and motor assembly from
fryer.
To replace pump on motor:
1. Using a 1/2 in. wrench, remove the 2 bolts securing pump
to the motor and pull the pump from the motor.
2. Install a new seal kit (part no. 17476) onto shaft of motor.
3. Align the shaft of motor with the rotor on the inside of the
pump and push pump onto shaft of motor.
4. Secure the pump onto the motor with the 2 bolts.
7-9. FILTER PUMP & MOTOR
(Continued)
Aug. 2008