Henny Penny LOV LVG-102, Technical Manual

Page: 27 / 98

Model LVG-102, 103, 104
5-2
5-2. SPECIAL PROGRAMMING
The Special Program Mode is used to set more detailed program-
ming, such as:
SP-1 • ZONE - USA or Non-USA (default setpoints)
SP-2
• System Initialization
SP-3 • 2nd Language: English, French, Candian-
French, German, Spanish, Portuguese,
Swedish, Russian, & NONE
SP-4 • Quick Configuration - CHKN+FISH; FF/HBR;
CHKN; EMPTY
SP-5 • Polish Duration - X:XX M:SS
SP-6 • Drain Valve - NORMAL or MANUAL
SP-7
• Edit S/N (Serial Number)
SP-8 • Decal Layout - UP/DOWN or DOWN/UP
SP-9
• Recovery Test Limit - XXX SEC
SP-10 • Melt Cycle Select - 1.LIQUID; 2.SOLID
SP-11 • Has Add-Oil Port? - NO PORT; YES PORT
SP-12
• Change Pad Reminder Time - XX HRS
SP-13 • Pan Out = Pad Changed Time - XXX SEC
SP-14
• Auto-Fill Enabled? - YES; NO
SP-15 • Auto-Fill Cycle Time? - XXX SEC
SP-16 • Auto-Fill Check JIB - XXX CNT
SP-17
• Oil Full If Delta Above... - XX
o
F or C
SP-18 • Oil Low If Delta Below... - XX
o
F or C
SP-19
• Heat Allowed During Fill? - HEAT OK; NO HEAT
SP-20 • Always Ask “IS POT FILLED?” - YES; NO
SP-21 • Oil Drain Time - XXX SEC
SP-22
• Oil WashTime - XXX SEC
SP-23 • Oil Rinse Time - XXX SEC
SP-24
• Oil Type Fill Time - XXX SEC
SP-25 • Repeat Fill Time - XXX SEC
SP-26 • RTD Air Cooling - X.XX
o
/SC
SP-27
• RTD Cold Oil Surround - X.XX
o
/SC
SP-28 • RTD Hot Oil Surround - X.XX
o
/SC
SP-29
• Temp. Probe x Above Min. - XXX
o
F or C
SP-30 • x Above Min. Hit Limit - XXX CNT
SP-31 • Level RTD Air Cooling - X.XX
o
/SC
SP-32
• Level RTD Oil Surround - X.XX
o
/SC
SP-33 • New Pad-Max. Fill Time - XXX SEC
SP-34
• Old Pad-Max. Fill Time - XXX SEC
SP-35 • Fill To Top Time - XXX SEC
SP-36 • Reach Top Plus x Seconds - XXX SEC
SP-37
• Fill Until Pan Empty - XXX SEC
SP-38 • Valve Auto - Cycle Period - X:XX H:MM
SP-39
• Refill Detect By.... - LVL PRBS or PRESSURE
SP-40 • Min. Wash PSI - XX.XX PSI
June 2008