Henny Penny LOV LVG-102, Technical Manual

Page: 16 / 98

Model LVG-102, 103, 104
3-1
Level 1 contains the following:
• Modify product settings
• Set the AIF clock for products
• Perform the Deep Clean procedure
• Fryer Setup Mode
1. Press and hold and buttons until LEVEL - 1
shows in the display, followed by ENTER CODE.
2. Enter code 1, 2, 3, 4 (first 4 product buttons).
“PRODUCT” and “SELECTN” show in the displays.
3. Press right √ button and ‘SELECT PRODUCT’ and “-P 1-”
(ex: NUGGETS) show in the displays.
Change Product Names
4. Use the and buttons to scroll through 40 products,
or press desired product button
5. Press right √ button and the product (ex: NUGGETS)
shows in left display and “MODIFY”, and “YES NO”
shows in right display. Press √ button to change this
product, or press the X button to choose another product.
6. If √ button was pressed, press and release a product button
and the flashing letter changes to the first letter under the
product button that was pressed. For example, if
pressed, the flashing letter changes to an “A”.
Press same button again and the flashing letter changes to a
“B”. Press it again and the flashing letter changes to a “C”.
Once desired letter shows in the display, press button
to continue to the next letter and repeat the procedure.
Press and hold the right X button to exit Program Mode, or
press button to continue on to “1. COOK TIME”.
To Change Times and Temperatures
7. Press button until “COOK TIME” shows in display,
and then use product buttons
to change the time in minutes and seconds, to a maximum
of 59:59.
SECTION 3. LEVEL 1 PROGRAMMING
3-1. MODIFYING PRODUCT
SETTINGS
Dec. 2007