Henny Penny LOV LVG-102, Technical Manual

Page: 22 / 98

Model LVG-102, 103, 104
4-1
Used to access the following:
• Advanced changes to product settings
• Error code log
• Password programming
• Alert Tone/Volume
• No. of cook cycles before filter is suggested
• Automatic filter time
1. Press and hold and buttons until LEVEL - 2
shows in the display, followed by ENTER CODE.
2. Enter code 1, 2, 3, 4 (first 4 product buttons). “PROD”
and “COMP” show in the displays.
3. Press right √ button and ‘SELECT PRODUCT’ and “-P 1-”
show in the displays.
4. Use the and buttons to scroll through 40 products,
or press the desired product button.
5. Press right √ button and product (ex: NUGGETS) shows in
the left display and “MODIFY” “YES NO” shows in the
right display. Press the √ button to change this product, or
press the X button to choose another product.
>Load Compensation, Load Compensation
Reference, Full Heat, PC Factor<
6. If √ button was pressed, “LD COMP” shows in the display
along with the load compensation value. This automatical-
ly adjusts the time to account for the size and temperature
of the cooking load. Press the product buttons
to change this value of 0 to 20.
7. Press button until “LCMP REF” shows in the display
along with the load compensation average temperature.
(if load compensation is set to “OFF”, then “_ _ _” shows
in display and setting cannot be programmed) This is the
average cooking temperature for each product. The timer
speeds up at temperatures above this setting and slows
down at temperatures below this setting. Press the product
buttons to change this value.
4-1. ADVANCED PRODUCT
SETTINGS
SECTION 4. LEVEL 2 PROGRAMMING
Dec. 2007