Heat & Glo • SUPREME-I30-NZ • 2417-900 Rev. E • 3/18
40
G. Install the Log Assembly
Log Set Assembly: LOGS-I30
Models: Supreme-I30, Supreme-I30-SP, Supreme-I30AU, Supreme-I30-C, Supreme-I30-NZ
CAUTION: Logs are fragile, handle with care.
Log #1 (SRV2206-701):
Bend the log tab into the upright position as shown in
Figure 1. Position Log #1 as shown in Figure 2. The left end of the log should rest on the log support. Mate the right end of the log
with the right grate tine. Rotate log clockwise, until the right end of the log engages the right grate tine, and the left end of the log
touches the log tab shown in Figure 1.
Figure 1.
Figure 2. Install Log #1
Figure 3. Log #2
Figure 4. Place Log #2
Log #2 (SRV2206-705)
: Position Log #2 as shown in Figure 3. Mate the slot located on the bottom of Log #2 (Figure 4) with the
log pin located on the surface of the burner. Rotate the right end of Log #2 clockwise, until it comes into contact with the grate tine.
LOG
SUPPORT
FLAT SPOTS
FOR LOG #4
MATE SLOT WITH LOG PIN
GRATE TINE FITS IN
LOG GROOVE
LOG RESTS ON
GRATE TINE
1
2
SRV2206-701
SRV2206-702
#1
#3
SLOT
2
LOG TAB
LOG SUPPORTS
LOG PIN
GRATE TINES
PILOT ASSEMBLY
SRV2206-703
SRV2206-704
#4
#5
SRV2206-706
SRV2206-705
#2
#6
