Heat & Glo • SUPREME-I30-NZ • 2417-900 Rev. E • 3/18
30
C. Optional Accessories Requirements
• This appliance may be used with a wall switch, wall
mounted thermostat and/or a remote control.
•
To connect optional accessories, the purchased power
cord assembly must be used. See attached Figure 10.2
for a wiring diagram for a blower or remote.
Wiring for optional Hearth & Home Technologies approved
accessories should be done now to avoid reconstruction.
Follow instructions that come with those accessories.
• Plug the cord into a convenient outlet.
• Must use power cord assembly (sold separately).
• An IntelliFire™ Plus Wireless Controls or WSK-21
wired wall switch may be used with the IntelliFire™
Plus Ignition System. Hearth & Home Technologies
recommends that IntelliFire™ Plus wireless controls be
used for their features and functionality with the Intel-
liFire™ Plus ignition system.
• A standard ON/OFF switch is compatible.
WARNING!
Risk of Shock!
Label all wires prior to dis-
connection when servicing controls. Wiring errors can
cause improper and dangerous operation. Verify proper
operation after servicing.
WARNING!
Risk of Shock!
Replace damaged wire with
type 105 °C rated wire. Wire must have high temperature
insulation.
Figure 10.2 Fan Wiring Diagram
NOTE:
USE ZIP TIES TO RESTRAIN
THE LOOSE WIRES UNDERNEATH
THE APPLIANCE AND KEEP THEM
AWAY FROM THE BLOWER WHEEL
(FAN BLADES).
NOTE:
IF ANY OF THE ORIGINAL
WIRE AS SUPPLIED WITH THE
APPLIANCE MUST BE REPLACED,
IT MUST BE REPLACED WITH TYPE
105 °C RATED WIRE.
PILOT OPTIONS
VALVE OPTIONS
FLAME
MODULATION
GROUND*
ORANGE
(PILOT)
GREEN
(MAIN)
MODULE
WIRE HARNESS
AUX300CE MODULE
NG 2166-302
LP 2166-303
NG 2202-013
LP 2202-014
2166-304
2166-340
2166-307
BLACK
RED
JUMPER WIRE
2187-198
OPTIONAL
WALL SWITCH
OR
SURROUND
SWITCH
POWER CORD ASSEMBLY
2222-374
SWITCHED DC
REGULATOR
2326-131
AUX1 AUX2
RED
* NOTE: GROUND FROM WIRE HARNESS
MUST BE ATTACHED TO UNPAINTED METAL
TO VALVE
GROUND
TERMINATION
WHITE
ORANGE
GAS TUBE
FLAME
SENSE
IGNITOR
FAN ASSEMBLY
GFK210-220/240VAC
BATTERY PACK - 6V DC
2166-323
