Heat & Glo • SUPREME-I30-NZ • 2417-900 Rev. E • 3/18
38
11
Finishing
A. Mantel and Wall Projections
WARNING!
Risk of Fire!
Comply with all minimum clear-
ances to combustibles as specified. Framing or finishing
material closer than the minimums listed must be construct-
ed entirely of noncombustible materials (i.e., steel studs,
concrete board, etc).
Clearance to combustible material under the insert is 1/4
inch (6 mm). Clearance from top of fireplace opening for
combustibles extending 12 inches (305 mm) max. is 12
inches (305 mm).
• Use leveling legs to raise insert minimum 1/4 inch (6 mm)
above combustible material or outer wrap of factory built
firebox.
Combustible facings must not extend behind the insert
surround. For non-combustible material specifications
refer to section 1.E.
Figure 11.1 Clearances to Mantels or other Combustibles
above Appliance
2 IN.
(51 mm)
MAX.
12 IN. MIN.
12 IN. MAX.
(305 mm MAX)
EXISTING NON-COMBUSTIBLE FACING
10 IN. MIN.
(305 mm MIN.)
(254 mm MIN.)
