HDG Pelletmaster 15, Operation Manual

Page: 131 / 172

6 Using the heating system – Structure of the menus
131
6 C
LEANING
No. Display Description
6-01 Cleaning
Grate pause
( 0) 0 m
• Pause time for grate movement
Set the time after which the stepped grate moves from
the rear end position.
(0 - 100 m)
6-02 Cleaning
No. of grate cycles
( 1) 1
• The number of grate movements
Set the number of movements of the stepped grate.
(0 - 200)
6-03 Cleaning
Grate runtime
( 80) 80 s
• Maximum grate runtime
Set the maximum runtime for the stepped grate. If the
grate does not reach its end position after the preset time
has expired, a fault message will appear in the display. (0 -
200 s)
6-04 Cleaning
Grate forwards
Fwd time
( 3) 3 s
• Time that the grate moves forwards
Set the time that the grate moves forwards.
(0 - 500 s)
6-06 Cleaning
Grate forwards
Fwd wait time
( 15) 15 s
• Pause time for grate moving forwards
Set the time after which the grate moves backwards.
(0 - 1000 s)
6-07 Cleaning
Grate back
Back time
( 3) 3 s
• Time that the grate moves backwards
Set the time that the grate moves backwards.
(0 - 500 s)
6-09 Cleaning
Grate back
Back wait time
( 15) 15
• Pause time for backward movement of grate
Set the time after which the grate moves backwards
again.
(0 - 1000 s)
6-11 Cleaning
Cleaning motor
runtime
( 15) 15 s
• Runtime for cleaning motor, tubular heat exchanger
Set the time in which the tubular heat exchanger is
cleaned.
(1 - 999 s)
6-12 Cleaning
Emptying the ash box
Acc. to stoker
runtime
( 0) 0 h
• Emptying interval for ash box
Set the time after which
Empty ash box
will appear in
the display. If this is set to 0 hours, the message will not be
shown in the display.
(0 - 200 h)
6-13 Cleaning
Ash auger
Pause time
( 20) 20 m
• Time during which the ash auger drive motor is
stopped
(0 - 100 m)
Table 6/8 - Service level / 6 Cleaning