CX22B‒W für autarke Messungen konfigurieren
CX22B / CX22B-W
A3169-8.0
HBM: public
69
Um den CX22B‒W für eine autarke Messung zu konfigu
rieren, sind Einstellungen in zwei Bereichen nötig:
S
Sie müssen in catman
EASY die entsprechenden
Einstellungen bei Messjobs und Optionen vornehmen,
damit catman
EASY nach dem Start ein Messprojekt
lädt und den Messjob startet.
S
Sie müssen dafür sorgen, dass catman
EASY beim
Einschalten des CX22B‒W gestartet wird.
Start und Stopp der Messung kann wie üblich sofort oder
über einen Trigger erfolgen. Sie können jedoch auch die
START/STOP‐Taste des CX22B‒W verwenden, siehe
Kapitel 4.9 auf Seite 22.
Vorgehensweise
►
Konfigurieren Sie Ihr Messprojekt wie in
beschrieben. Lassen Sie bei den Messjobs die Daten
Automatisch am Ende des Jobs
sichern (
Daten
speicherung
in der Gruppe
Einstellungen
, Parame
ter
Datensicherung
).
►
Speichern Sie das Messprojekt.
►
Rufen Sie die Optionen von catman
EASY auf (Da
teimenü) und gehen Sie zu
Programmstart
(Gruppe
System
).
►
Wählen Sie für den
Start‐Modus
ein
Bestehendes
Messprojekt
und wählen Sie das oben erstellte Pro
jekt in der Zeile
Messprojekt
aus.
►
Aktivieren Sie die Option
Ersten Messjob automa
tisch ausführen
.
►
Gehen Sie zu
Messkanäle
in der Gruppe
Kanäle
und Sensoren
.
►
Aktivieren Sie die Option
Fehlerhafte Kanäle
automatisch deaktivieren und Messung fortsetzen