DAX60 60-WATT POWER AMPLIFIER
DAX120 120-WATT POWER AMPLIFIER
INSTALLATION AND SERVICE
KI-1480
RAULAND-BORG CORPORATION
l
3450
West Oakton Street, Skokie, Illinois 60076-2951
l
(708) 679-0900
GENERAL DESCRIPTION
The Rauland DAK Series amplifiers are designed for use with Rauland's
institutional program and communication systems. They offer high-quality sound
and dependability. They can be driven to their rated power output by an input
signal as low as
0.3
volts. Their transformer-isolated, 25-volt balanced out-
put matches the output of Rauland's communication panels; they also have a
70.7-volt balanced output. Their outputs can operate with a split center tap
with Rauland's Telecenter® 5000 and Responder@ 3000 systems. The amplifiers
are listed by Underwriters Laboratories,
The DAX amplifiers offer helpful power connections for related equipment:
three 120-VAC three-pin grounded outlets,
and a floating auxiliary DC power
output (28 VDC, 1.2 A) that can be used for Rauland's Director Series control
panels, preamplifiers, graphic equalizer, and other equipment.
The amplifiers come with black-enamel face panels. Optional brushed-
chrome dress panels-- the RP2525 (DAX6O) and RP2700 (DAX120)--are available.
UNPACKING
The amplifier was thoroughly checked at the factory. Inspect the amplifi-
er,
the enclosed parts,
and the shipping container for signs of improper han-
dling during shipment. In case of damage,
immediately place a claim: with the
dealer or distributor from whom you purchased the unit or--if the unit was
shipped directly to you--with the carrier.
The following parts are included with the amplifier:
D e s c r i p t i o n
Qty.
Rauland
Part No.
4
Rack-Mounting Screws for tapped holes (l0-32 x ½" hex-head, WA202
SEMS, unslotted, machine).
4 Rack-Mounting Screws for untapped holes (10 x ½" pan-head, WA102
slotted, thread-forming).
4 #l0 Tinnerman "U" type Speed Nuts, for untapped rack holes. AB1889
INSTALLATION
The amplifier should be rack-mounted where there is adequate ventilation,
a moderate temperature, an AC power outlet, and provisions for grounding.
The rack should have the standard 19-inch width and a vertical space of at
least 5¼ inches (DAX6O) or 7 inches (DAX120). It is recommended that addition-
01987 RAULAND-BORG CORPORATION PRINTED IN U.S.A. 7/87
Page 1 of 17
