Der erste Messjob mit catman
EASY
56
A3169-8.0
HBM: public
CX22B / CX22B-W
8
Der erste Messjob mit catman
EASY
Starten Sie catman
EASY im Startbildschirm
.
►
Führen Sie einen Gerätescan durch
►
Wählen Sie die gewünschten Geräte aus.
8.1
Erstellen eines Messjobs
Ein Messprojekt enthält alle Einstellungen zu den
verwendeten Geräten, Aufnehmern (Sensoren), Berech
nungen wie die Messung durchzuführen ist und welche
Daten online visualisiert und gespeichert werden sollen.
Messkanäle einrichten
Falls Sie keine Aufnehmer mit TEDS (
T
ransducer
E
lec
tronic
D
ata
S
heet) verwenden, weisen Sie den Kanälen
die angeschlossenen Sensoren (Aufnehmer) zu: suchen
Sie Ihre Sensoren in der Sensorliste (Komponentenfens
ter
Sensordatenbank
) und ziehen Sie jeden Sensor per
Drag&Drop auf den Kanal, an dem er angeschlossen ist.
Erstellen Sie bei Bedarf Ihre Sensoren in der Sensorda
tenbank.
Vergeben Sie eindeutige Kanalnamen
Über das Kontextmenü
Umbenennen
können Sie
Kanalnamen mit laufender Nummerierung erzeugen oder
die Sensorbezeichnung übernehmen lassen. Jeder Kanal
wird in catman
EASY über seinen Namen identifiziert,
verwenden Sie deshalb möglichst aussagekräftige
Namen.