Anschließen von QuantumX‐Modulen
28
A3169-8.0
HBM: public
CX22B / CX22B-W
5
Anschließen von QuantumX‐Modulen
Die QuantumX‐Module werden im einfachsten Fall mit
dem Datenrekorder über FireWire verbunden. Schließen
Sie das Kabel 1-KAB272-x an einem beliebigen An
schluss des Datenrekorders an und die andere Seite am
Anschluss X102 des nächsten Messmoduls.
Dann kann weiter gefädelt werden: Anschluss X102 auf
X101 des zweiten Messmoduls usw. Denken Sie daran,
dass der Maximalstrom 1,5 A betragen darf. Im Regelfall
müssen Sie nach 3 Modulen erneut eine Spannungsver
sorgung zuführen
.
Am anderen Anschluss können Sie
ebenfalls Messmodule anschließen.
Alternativ können Sie auch alle QuantumX‐Module über
Ethernet mit dem CX22B‒W verbinden. Bei mehr als
zwei Modulen benötigen Sie dabei zusätzlich einen
Ethernet‐Switch.
In der unten dargestellten Konfiguration wird die Versor
gungsspannung der Module über FireWire durchge
schleift (maximal 1,5 A über FireWire). Die Leistungsauf
nahme eines Moduls wird im Datenblatt erläutert
.
Sie können bis zu 12 Module über FireWire mit dem
CX22B‒W‐Datenrekorder verbinden, die Einspeisung der
Speisespannung muss mindestens an jedem 4. Modul
erfolgen und annähernd den gleichen Spannungswert
haben. Ausführliche Angaben dazu enthält die Allge
meine QuantumX‐Bedienungsanleitung
.