Der erste Messjob mit catman
EASY
58
A3169-8.0
HBM: public
CX22B / CX22B-W
verwenden. Andernfalls muss während der Messung
ein Bildschirm angeschlossen sein, damit Sie die Da
ten speichern können.
►
Erzeugen Sie
−
falls ein Bildschirm angeschlossen ist
−
eine Visualisierung.
►
Speichern Sie Ihr Messprojekt:
Dateimenü
−
> Spei
chern
−
> Projekt
.
►
Starten Sie Ihr Messprojekt über
Start
in der Gruppe
Messung
.
Falls Sie keine Visualisierung erzeugt haben, werden Sie
gefragt, ob eine der Voreinstellungen für die Vi
sualisierung verwendet werden soll.
►
Klicken Sie hier auf
Ohne Anzeige messen
,
wenn
während der Messung kein Bildschirm angeschlossen
sein wird.
Der Messmodus des CX22B‒W wird aktiviert. Falls Sie
einen Starttrigger definiert haben, z. B. die START/
STOP‐Taste, wird auf diesen gewartet, andernfalls
startet die Messung. Die LED „RECORDING“ blinkt, so
lange auf den Starttrigger gewartet wird, sie leuchtet kon
tinuierlich, sobald die Messung läuft.
Wichtig
Die LED „ERROR“ leuchtet gelb, wenn ein Fehler in cat
man
EASY vorliegt, z. B. wenn die Verbindung zu Gerä
ten beim Projektstart nicht hergestellt werden kann oder
wenn der Messjob nicht gestartet werden kann. Die LED
„ERROR“ blinkt, wenn der verfügbare freie Speicher un
ter 1 GByte fällt.